The vibrating screen motor is the power source in the whole vibrating screen working system, which also has a great impact on the requirements for the screening effect of the vibrating screen under certain circumstances, so it is necessary for the normal and lasting operation of the vibrating screen motor. The difference between the vibrating screen motor and the vibrating screen mesh, bouncing ball and other parts is that it cannot be replaced immediately once damaged, because there are few users who buy the vibrating motor for standby, Therefore, it is necessary to master the maintenance and repair of vibrating screen motor.
1、 Maintenance
In order to make the vibrating screen motor work normally and prolong its service life, daily maintenance is indispensable. The more diligent and effective the daily maintenance is, the more fundamental it is to maintain the stable performance of the vibrating screen motor.
1. Ensure that the bearing of vibration motor has proper axial clearance.
The bearing of the vibrating screen will heat and expand after high-speed operation, and an appropriate amount of axial clearance is reserved to ensure that the bearing can work normally after heating and expansion, so that the motor will not be burned.
2. Eccentric block is adjusted correctly
As the daily production of the customer will change greatly in a period of time, at this time, the exciting force of the vibrating motor can generally be changed by adjusting the included angle of the eccentric block. At this time, it should be noted that the inner eccentric block is consistent in the axial direction, and the included angle of the eccentric blocks at both ends and the inner eccentric block should be the same, otherwise the staggered exciting force will be generated and the vibrating screen will be damaged.
3. Ensure lubrication of vibrating motor
To ensure the good lubrication of the vibrating motor is inseparable from the regular addition of grease, which is generally added once every half a month.
4. Regular shutdown and maintenance
After the vibrating motor works for a period of time, some of its components will be aged and not suitable for further use, mainly due to the wear of the bearings; In addition, a lot of dust has accumulated in the vibrating motor during this period of time, so it should be cleaned up.
Quality for survival, reputation for development, Guanyu machinery!